bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about GMC Sierra 1500


  • Mileage Increase with Edge CTS3 EP39YR Programmer on 2015 GMC Sierra 1500.
  • A programmer, such as the Edge CTS3 # EP39YR will give you a slight increase in your 2015 GMC Sierra 1500's mpg. Typically, the mileage improvement is marginal, usually around 1-2 mpg. The actual increase you see will depend on several factors, such as the overall condition of the vehicle's drivetrain, driving style and the environmental conditions in which the vehicle is being operated. There really isn't a product on the market designed to drastically increase a vehicle's mpg. This product...
    view full answer...

  • B&W Tow & Stow Ball Mount With 4-1/2 Inches of Drop For GMC MultiPro Tailgate
  • There is indeed a B&W Tow & Stow ball mount that gives up up to 4-1/2 inches of drop and works with your GMC MultiPro tailgate; what you need is the following part number: - B&W Tow & Stow 2-Ball Mount - MultiPro - 2" Hitch - 4.5" Drop/5.5" Rise # BW29FR The # BW29FR has a 2" hitch ball with a 7,500 lb capacity and 2-5/16" hitch ball with a 10,000 lb capacity. In order to secure it to your hitch you will need the InfiniteRule Locking Pin for B&W Tow and Stow 10K and 14.5K Ball Mounts...
    view full answer...

  • Will B&W Tow & Stow 2-Ball Mount Clear GMC MultiPro Tailgate With Mount Removed
  • Yes, the B&W Tow & Stow 2-Ball Mount - MultiPro - 2" Hitch - 4.5" Drop/5.5" Rise # BW29FR. will allow indeed allow you to open the GMC MultiPro tailgate. This is designed specifically so you can leave the ball mount in and use the MultiPro tailgate; you can lock it with Hitch Lock # e98882.
    view full answer...

  • What Torque Should Be Used For U-Bolt Nuts On Trailer Suspension
  • If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.
    view full answer...

  • Options For Mounting WDH Frame Brackets In An Alternative Location
  • One option is to relocate the propane tank tray. A lot of times the trays are attached to the A-frame with self tapping screws. You could remove the screws and move the tray front/back as needed. There is not any kind of adapter that is made for this purpose and you will have to connect the frame brackets 20-25 inches back from the center of the ball if you want to use a Blue Ox WD hitch like the # BLU75FR. Another option is to go with an Equalizer brand WD hitch like the # EQ37140ET....
    view full answer...

  • Installation of Optronics TLL12RK LED Trailer Taillights
  • Although there isn't a plug and play harness available, wiring up the # TLL12RK taillights to a trailer harness like # A10-4225VP would be extremely easy, as you can see in the provided video where my buddy Jake shows how the harness is installed. The wiring pigtails included with the # TLL12RK would connect as follows: • Red wire on pigtail connects to green wire on right side, yellow wire on left side • Black wire on pigtail connects to brown wire on both sides • White wire grounds...
    view full answer...

  • Will the Andersen Ultimate Connection 5th Wheel Trailer Hitch System Void the Trailer Warranty
  • The Andersen Ultimate Connection 5th Wheel Trailer Hitch System part # AM3200 will not void the warranty on any trailer or frame (Including Lippert) per Anderson so you won't have any issues using this hitch on a newer trailer.
    view full answer...

  • Can Trimax Puck Lock for Trailer Door Hasps be Keyed Alike
  • The Trimax Puck Lock for Trailer Door Hasps # TMX96RR cannot be keyed alike. While disappointing I'm sure, there is another option to consider, which is to order a quantity of two of the Trimax Puck Locks for Trailer Door Hasps # TMX73FR. The # TMX73FR comes with three locks, each of them with the same key, so if you ordered two you'd get six total locks that only use two different keys. While this is one more lock than you asked for, I wanted to mention it as an option just because it'd...
    view full answer...

  • Will K-Source Towing Mirrors Install Easily In Cold Weather On 2014 GMC Sierra 1500
  • We haven't received any negative feedback from customers that have purchased the K-Source Custom Towing Mirrors, part # KS80910 about the fit or problems with the mirrors in colder weather. If your concern is with the clips that hold the K-Source mirrors in place, I would recommend the Longview Custom Towing Mirrors, part # LVT-1800. These slip over your 2014 GMC Sierra 1500 mirrors and are held in place with the included arm that hooks to the inside edge of your mirrors. A hand knob...
    view full answer...

  • How to Determine Which Ball Mount to Choose
  • The ball mount you need will depend on several factors, including the height of the trailer hitch, the height of the trailer coupler when the trailer is level and how heavy the trailer is. As a first step, you'll need to determine the rise or drop you'l need. Simply measure from the inside top of the receiver tube to the ground. Then with the trailer level, measure from the bottom edge of the coupler to the ground. The height difference is the rise or drop. If the hitch is taller, you'll...
    view full answer...

  • Is the MagnaFlow Stainless Steel, Straight-Through Universal Muffler Loud
  • You have found your match for a muffler if you are looking for something that is not very loud on your 2018 GMC Sierra. The MagnaFlow Stainless Steel, Straight-Through Universal Muffler # MF12215 is a bit louder than your stock muffler but definitely not something that will burn your ears. I think you already used the perfect word for this muffler - subtle.
    view full answer...

  • Horsepower and Torque Gain w/ Airaid MXP Cold Air Intake System # AR200-285 on 2015 GMC Sierra 1500
  • I spoke with my contact at Airaid and when using the MXP Cold Air Intake System with SynthaFlow Oiled Filter, # AR200-285, on 2015 GMC Sierra 1500, the Dyno testing, which reports at the rear wheels, shows a gain of 24 horsepower and 22 ft lbs of torque.
    view full answer...

  • Is the Jensen Heavy Duty Outdoor Speaker Designed to Withstand Rain and Snow
  • Yes, the Jensen Heavy Duty Outdoor Speaker # JEN33VR is designed to withstand snow and rain, as well as salt and sun exposure. It has a durable, plastic construction that surrounds and protects the speaker from damage due to weather such as snow, rain, salt spray and UV exposure.
    view full answer...

  • What is Covered in as part of the Taskmaster 2 Year Trailer Tire Warranty?
  • I reached out to Taskmaster and the 2 year Platinum Plus Warranty includes 24/7 roadside assistance for 2 years. The warranty covers any manufacturing defects that occur in those first two years and they will usually ship brand new replacements in those situations.
    view full answer...

  • How to Measure the Bed of 2014 GMC Sierra 1500 and How Do I Know If I Have a Cargo Management System
  • To determine the size of your truck bed, you will want to measure the inside of the truck bed from front to back. Most accessory companies round off their measurements to the nearest half-foot so your measurement may not exactly match the options that we have listed. The GM Cargo Management System is a rail system which runs the length of the bed sides and behind the cab. The BedRug Custom Full Truck Bed Liner, # BRC07CCK, that we offer is made to fit a 5-1/2 foot bed without the Cargo...
    view full answer...

  • ATV/UTV Wheel Tie Downs That Are Made In The USA
  • While we do not have an entire kit like the Erickson ATV E-Track Tie-Down Kit # EM98CV that is Made in the USA, we will have different parts that are Made in the USA. For straps we have the Snap-Loc E-Track Tie-Down Strap # SLLS28RER. These 2" wide by 8' long straps have a safe working load of 1,467lbs each. You can attach the straps to the Stainless Steel Snap-Loc E-Track Tie-Down Anchor # SLSS which is also Made in the USA and the stainless steel construction will outlast other anchors...
    view full answer...

  • Correct Vehicle-End 7-Way Pin Functions
  • The photo you are referring to, which I have added, is actually correct. The left side of the diagram is simply the face of a vehicle-end 7-way. The right side of the diagram is what you would see if you pulled the connector out, turned it around and looked inside. That is why the functions (Brake Controller Output, Ground) are on the opposite sides. I have added a link to a help article on trailer wiring which I recommend checking out as it has a bunch of really good info.
    view full answer...

  • Replacement EZ Lube Spindle For 3,500 LB Axle
  • The EZ Lube Trailer Spindle we carry for a 3,500 lb axle is the TruRyde Spindle, part # TRU74FR. This spindle includes the nut and washers. The overall length of this spindle is 9 inches. This spindle is compatible with # L44649 outer and # L68149 inner bearings, and has a The bearing kit that would work with this spindle is part # BK2-100. All of the spindles we carry are a weld-on application. Please keep in mind that installing the spindle requires welding it to the axle by a certified...
    view full answer...

  • Can Trailer Tow a Trailer With Golf Car
  • From my research it looks like the GVWR of the 2018 Forest River Work and Play you were referring to is 11,300 lbs so the GVWR of the trailer and golf cart you wanted to haul would need to be less than 1,200 lbs (due to the 12,500 lb towing capacity of your truck). That seems unlikely, and you would also need to stay within the tongue weight rating of no more than 1,500 lbs, which is something you would only be able to find out once the trailer(s) are fully loaded either by using a scale...
    view full answer...

  • Aries Nerf Bars for 2020 GMC Sierra 1500
  • The Aries # AAS2891 Oval Nerf Bars do not include the mounting bracket/hardware, nor do we carry an Aries a 6 inch oval Nerf bar/bracket kit exactly like the # AAS2891 that would fit a 2020 Sierra 1500. I'd recommend the # AA97FR for the extended cab model (what GM refers to as the Double Cab) or # AAAL234053 for the Crew Cab model.
    view full answer...